check_cisco_ips

SNMP Cisco IPS Monitor

Usage

./check_cisco_ips [-v] -H -C [-2] | (-l login -x passwd [-X pass -L ,]) [-p ] -w -c -T [cpu|mem|health] [-f] [-t ] [-V]\n"

Options

-v, --verbose
   print extra debugging information 
-h, --help
   print this help message
-H, --hostname=HOST
   name or IP address of host to check
-C, --community=COMMUNITY NAME
   community name for the host's SNMP agent (implies v1 protocol)
-2, --v2c
   Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
   Login and auth password for snmpv3 authentication 
   If no priv password exists, implies AuthNoPriv 
-X, --privpass=PASSWD
   Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=, : Authentication protocol (md5|sha : default md5)
    : Priv protocole (des|aes : default des) 
-P, --port=PORT
   SNMP port (Default 161)
-w, --warn=INTEGER | INT,INT,INT
   1 value check : warning level for cpu in percent (on one minute)
   3 value check : comma separated level for load or cpu for 1min, 5min, 15min 
-c, --crit=INTEGER | INT,INT,INT
   critical level for cpu in percent (on one minute)
   1 value check : critical level for cpu in percent (on one minute)
   3 value check : comma separated level for load or cpu for 1min, 5min, 15min 
-T, --type=cpu|mem|health
    IPS check : 
        cpu : Cisco IPS CPU usage
        mem : Cisco IPS memory usage
                health : Cisco IPS health status 
-f, --perfparse
   Perfparse compatible output
-t, --timeout=INTEGER
   timeout for SNMP in seconds (Default: 5)
-V, --version
   prints version number